Some people are inveterate hoarders and I very definitely fall into that category. I seem to view items which are commonly regarded as rubbish as if they are imbued with some sort of magical properties. In my head I can hear the little voice trotting out the well-worn phrase ‘this will be really useful one day’. That alone is bad enough when it is simply left overs or freely available bits of tat but I even buy bits and pieces which I imagine will meet some yet to be defined requirement. Cupboards and drawers overflow with cogs/gears/switches rescued from long defunked machines. Empty coffee jars filled to the brim with rusty screws line shelves in the shed, jostling for room with the half-empty tins of paint. It is all very disorganised and probably says a lot about my state of mind. And yet there are occasional victories in this war against waste, as my rotary lure drier testifies!
I wanted to make a small device which would keep lures turning when newly coated with two-part epoxy until the coating had set. YouTube provided me with videos of some examples of similar wonderful homemade machines. Some were too big for my requirements, others were far beyond my skills (like the guy who made his own wooden gear wheels). I gleaned a sufficient understanding of the principles involved to give me the confidence to try to create my own version, so parting with the pricely sum of £8 I invested in the main item – the disco ball motor. I suspect that few, if any of us, have spent time contemplating the finer points of revolving glitter balls, so beloved of the 1970’s disco scene. Fewer still are probably aware that for such a small sum you can purchase a tiny motor built specifically for that role. Somewhere, in the vastness of the Peoples Republic of China, there is a factory churning out these things to meet the insatiable global demand for slowly revolving mirrored balls. Anyway, I bought one.
The basic concept of these lure drying contraptions is simple enough. The freshly coated lures are attached to a revolving frame of some sort which is driven by the motor. Various options for holding the lures on the carrier frame exist such as small crocodile clips, springs and elastic bands. It was the stand for holding the frame which was giving me a headache – what should that be made from and how big should it be. I rummaged around in my hoard of treasures and was rewarded with a find which justified my addiction (well in my mind anyway). Tucked away at the back of a shelf in a cupboard in the spare room I unearthed some bits of polycarbonate sheet. Exactly where or when these came into my possession is beyond my rapidly receding memory, but judging by the thick layer of dust on them it looks like they have been in there for a very long time indeed. Odd shapes with scratched surfaces, they were clearly off-cuts which had been binned. Among the various flat pieces there were lurking two which had been folded on one end to make an ‘L’ shape. Eureka! These might do for mounting my wee disco ball motor. (It has just occurred to me that I need to explain why the specific disco ball motor is so necessary. You see it has to do with the speed of rotation, too fast or too slow and the epoxy will run. Like a lure making Goldilocks, disco ball motors are neither too fast nor too slow – they revolve at exactly the right speed. Now, where was I……?)
Using the pair of L pieces also solved another issue for me – how big should the whole machine be. I only want to occasionally paint up a few lures so this dryer only needs to hold a handful of them at any one time. The epoxy I will use is 5 minute, meaning that is how long it remains workable, again, roughly enough time to coat a handful of lures. I decided I wanted the frame to be sized to accommodate 4 lures at a time. The two ‘L’ pieces would meet that requirement for the end stands perfectly. Along with the bent pieces I had found a heavy rectangular slab of the same material which would serve as a base. Once I dusted that down it looked to be about the right size too.
The motor had to be attached to the carrier frame somehow and this looked a bit tricky. A split ring with a length of chain had been fitted to the motor when it arrived, obviously to make life easier for any budding John Travolta’s so they could maximise their time on the illuminated dance floor. I removed the chain but was left with a short, smooth 7mm diameter spigot with a small hole in it. Various drilling/tapping options floated through my mind but in the end I settled for a pin arrangement to link the motor to a central wooden bar.
Timber ‘arms’ then had to be cut and screwed to the central bar. These would sport small hooks for the elastic bands and wires which hold the lures while curing.
Putting the whole shebang together was done using various small nuts and bolts (remember the contents those glass jars?). Holes were drilled, nuts and bolts tightened and fittings screwed into place. Rubber ‘feet’ stuck on to the underside of the base to give a degree of grip seemed like a useful addition.
Eventually I had the contraption assembled and I gave it a test spin. It rotated just fine and did exactly what I wanted of it. It lacks a switch to turn it on and off but considering how often I will use this thing I am not going to bother with one, I’ll just turn it on or off at the mains. It sticks a little bit sometimes but as I will only be using this tool for a few minutes at a time I will not get overly stressed about it.
There were some lures lying around which required epoxy so I mixed some up and gave the new dryer its first trial. I had to fiddle about to get the hooks and wires just right but once I had that sorted the new contraption worked just dandy. It was quite satisfying to see it in action. I know it will only be used very occasionally and it was a lot of fuss and bother to go to but hey, what else would I be doing on a wet November day during lockdown?
I’m not going to suggest this is the most professional lure dryer out there, nor is it likely to induce any sort of a fever of a Saturday night but it does the job for me and there is great satisfaction in making something useful from my stash of junk. Now, where did I put my white suit with the high-waisted flared trousers?